Typical applications: STAIN-PROOF is suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and entertaining areas.
Benefits: STAIN-PROOF is able to repel stains, graffiti and food products making cleaning easier; non film-forming; able to work without changing the appearance of the surface - keeps the original look; suitable for indoor and outdoor use; able to greatly reduce water uptake and minimise moss growth, freeze thaw spalling and efflorescence; an excellent chloride ion salt screen ?ideal for marine and pool areas; highly water vapour permeableable to breathe so there is no build-up of subsurface moisture, allowing it to dry out; deeply penetrating protecting against weathering and wearing; very alkali resistant; won't break down in contact with cement based materials, able to seal hairline cracks up to 0.3 mm (0.012 in.) and does not flake or peel.
Warranty: A 15-YEAR PERFORMANCE WARRANTY is offered when product applied by an Accredited Applicator following our written instructions and surface is maintained regularly using our written maintenance system, as outlined in our warranty document. Spills should still be cleaned up immediately to minimise absorption.
Application rates: Total application rate is approximately one litre per two to 25 sq. metres (20 to 250 sq. feet per quart) depending on absorption.
How to use:
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
2. Ensure surfaces to be treated are dry, clean and free of residues.
3. Product is to be applied without thinning.
4. Generously saturate the surface with product using a low-pressure hand spray, a clean brush, or similar. Surface should have a mirror-like wet look for 3-5 seconds. Avoid contact with surrounding areas.
5. When the surface becomes touch dry, or a minimum of 10 minutes, repeat Step 4. Total application rate is approximately one litre per two to 25 sq. metres (20 to 250 sq. feet per quart) depending on absorption.
6. When the surface becomes touch dry, or a minimum of 10 minutes, to allow the product to penetrate into the surface, polish surface with a clean white dry cloth to remove excess product. If you have waited too long and the product has begun to cure and has become more difficult to remove, moistening the cloth with STAIN-PROOF should ease polishing.
7. Use an organic solvent e.g. methylated spirits to clean equipment.
8. Sealer will not prevent surface etching, scuff marks or wear and may lighten or darken some surfaces. STAIN-PROOF will make the maintenance and cleaning of a treated surface much easier. Once cured, this product is food contact safe.
Precautions: Do not take internally. Apply when surface temperature is between 5 - 35ºC(40 - 95ºF). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate. Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly.
Active content: 50 per cent active content in alcohol.
Pack size: North America: 1 quart, 1 gallon, 5 gallons. Elsewhere: 1, 4, 5 and 20 litre container.
Reference sites:
AUSTRALIA
Rundle Street Mall, Adelaide, Australia (1000 sq m)
World Square Mall, Melbourne, Australia (1000 sq m)
Noosa Shopping Centre, Noosa, Australia (5000 sq m)
Merlion Park, Singapore (2000 sq m)
Residence, 37 Venetta St, Sylvania, NSW, Australia
Residence, 7a Sydenham Road, Doubleview, WA , Australia
Residence, 33 Stone Street, Armadale, WA, Australia
Apartments, 110 Hay Street, Subiaco, WA , Australia
MCF Foot bridge, Vic , Australia
Federation Square, Vic, Australia
Collins Street Mall, Vic ,Australia
Victoria National Art Gallery, Vic ,Australia
Queen Victoria Building, NSW ,Australia
Tourism College, Manly, NSW ,Australia
The ?an, Kings Cross, NSW, Australia
North Sydney Olympic Pool, NSW, Australia
Noosa Shopping Centre, Qld, Australia
THE REST OF THE WORLD
Beneton Super Stores, Vienna & Graz, Austria
Lady Peels House, London, UK
Residence, 54 Cathcart Road, Chelsea, UK
Shopping Centre, Luxabuild, Kuala Lumpa
Ascot Hotel, New Zealand
USA Embassy, Sofia, Bulgaria
USA Napier Valley Winery, CA
Chase Bank, San Antonio, T X
First City Tower, Houston, TX
Wescates Court, Brentwood, TN
Alpine Elementary School, CO
Legacy Elementary School, Fredrick, CO
CR 6541, Kirkland, NM
West Walnut, Rogers, Carlton Dunes Drive, Amelia Island, FL
Via Sienna, Winter Park, FL
Ardsley Drive, Orlando, FL
South Orange Ave, Orlando, FL
Katrina Cove, Longwood, FL
Legion Drive, Winter Park, FL
Amberwood, Fayetteville, AR
East Central, Bentonville, AR
Mayfair Drive, Bella Vista, AR
Twin Peaks Charter Academy, Main St, Longmont, CO
King George Drive, Orlando, FL
Pembroke Ct, Castle Rock, CO
Fredrick Ave, Lake Mary, FL
North East Ave, The Heritage, Fayetteville, AR
Eastwood, Fayetteville, AR
Candlewood Drive, Fayetteville, AR
Ave of the Stars, East City, Los Angeles, CA
Teton Run, Orlando, FL
Aloma Ave, Winter Park, FL
Test reports: Resistance to salt attack tests on pavers - BEMAC Laboratories. Staining liquid tests to ISO 10545-14 - Eureka Tiles. Coefficient of friction of wet surfaces - BEMAC Laboratories.
Storage: Use product within 12 months of purchase. Keep container tightly sealed, in a cool well-ventilated place. It is recommended that this product is best used within seven days from opening to avoid possible spoilage. Product is freeze-thaw stable.
