Typical applications:
COLOUR-TREAT is suitable for a wide variety of applications, including building facades, roads, paving, flooring, floors, walls, swimming pool surrounds, patios, garages, kitchens and entertaining areas. Colour-Treat is ideal for restoring areas of paving, car parks, off-form concrete, façade render and roof tiles.
Benefits:
COLOUR-TREAT able to give permanent colour treatment using inorganic pigments; able to repel water and efflorescence salts (95 per cent reduction); able to work without a change in the texture or feel of the surface; can deeply penetrate- providing protection against weathering; suitable for indoor and outdoor use; able to greatly reduce water uptake and minimise moss growth, freeze thaw spalling and efflorescence; an excellent chloride ion salt screen - ideal for marine and pool areas; highly water vapour permeable - able to breathe so there is no build-up of subsurface very alkali resistant - won't breakdown in contact with cement based materials, and able to seal hairline cracks up to 0.3 mm (0.012 in.) and does not flake or peel.
Warranty:
A 5-YEAR PERFORMANCE WARRANTY is offered when COLOUR-TREAT is applied by an accredited applicator following our written instructions.
Application rate:
Total application rate is approximately one litre per 0.5 to four sq. metres (five to 40 sq. feet per quart) depending on absorption.
How to use:
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
2. Ensure surfaces to be treated are dry, clean and free of residues.
3. Product is to be applied without thinning.
4.Generously saturate the surface with product using a low-pressure hand spray, a clean brush, or similar. Surface should have a mirror-like "wet" look for 3-5 seconds. Avoid contact with surrounding areas. 5. After 12-hours repeat Step 4. Total application rate is approximately one litre per 0.5 to four sq. metres (five to 40 sq. feet per quart) depending on absorption. Repeat this step until desired colour is reached.
6. Clean equipment with organic solvent.
7. Sealer will not prevent surface etching or wear and may lighten or darken some surfaces.
Precautions:
Do not take internally. Apply when surface temperature is between 5 - 35ºC (40 - 95ºF). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate. Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly.
Active content:
A mixture of 40 per cent active content in non-water-based solvent.
Pack size: North America; 1 gallon, Elsewhere; 5 litre container.
Reference sites:
Chase Bank canteen, San Antonio, Texas, USA
Maylands Shopping Centre, Mayfield, NSW , Australia
Commercial car park, Wolf and Church Streets, Newcastle, NSW, Australia
Residence, 26 Penile Street, Lane Cove, NSW , Australia
Residence, 5 Superb Parade, Mosman, NSW, Australia
Residence, 132 Jersey Road, Woollahra, NSW, Australia
Residence, 10 Farrar Street, Balgowlah Heights, NSW, Australia
Residence, Reservoir Road, Blacktown, NSW, Australia
Residence, 55 Bolwarra Ave, West Pymble, NSW, Australia
Residence, 10 Monaco Drive, Kellyville, NSW, Australia
Residence, Bowness Circuit, Kellyville, NSW ,Australia
Residence, Sanctuary Drive, Windsor Down, NSW, Australia
Residence, 7 Raymond Terrace, East Maitland, NSW, Australia
Residence, 5 Sutton Green, West Pennant Hills, NSW ,Australia
Residence, Cabarita Road, Cabarita, NSW, Australia
Residence, Gas Works Road, Wollstonecraft, NSW, Australia
Storage:
Use product within 12 months of purchase. Keep container tightly sealed, in a cool well-ventilated place. Product is freeze-thaw stable.
