Typical applications:

DRY-TREAT CRÈME is suitable for a wide variety of applications, including marine infrastructure such as wharves and jetties, building facades, car parks and swimming pool surrounds.

Benefits:
DRY-TREAT CRÈME able to repel water and chloride ion (97 per cent reduction); non film-forming; able to work without changing the appearance of the surface - keeps the original look; anon-drip gel; ideal for use in windy conditions; is able to breathe so there is no build-up of subsurface moisture, allowing it dry out; very alkali resistant - won't breakdown in contact with cement-based materials; able to seal hairline cracks up to 0.3 mm (0.012 in.) and will not flake or peel, and water-based and easy to use.

Warranty:
A 30-YEAR PERFORMANCE WARRANTY is offered when DRY-TREAT CRÈME is applied by an accredited applicator following our written instructions and tested by us.

Application rates:
Total application rate is approximately one litre per two to four sq. metres depending on absorption.
How to use:
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
2. Ensure surfaces to be treated are dry, clean and free of residues.
3. Product is to be applied without thinning.
4. Generously saturate the surface with product using a low-pressure airless spray unit, lambs wool roller, a clean brush, or similar. Surface should have a uniform "white" look. Avoid contact with surrounding areas.
5. Total application rate is approximately one litre per two to five sq. metres depending on absorption.
6. Let the product dry for a minimum of 12 hours before using the surface.
7. Clean equipment with water.
8. Sealer will not prevent surface etching or wear and may lighten or darken some surfaces.

Precautions:
Do not take internally. Apply when surface temperature is between 5 - 35ºC (40 - 95ºF). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate. Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly.

Active content:
An approximately 80 per cent active content in water.

Pack size:
20 litre pails or 200 litre drums.

Reference sites:
MacKay Port Authority, Qld, Australia.

Storage:
Use product within 12 months of purchase. Keep container tightly sealed, in a cool well-ventilated place. It is recommended that this product is best used within seven days from opening to avoid possible spoiling. Product is freeze-thaw stable.