Typical applications: NO-MORE-GRIME is suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and entertaining areas.
Benefits: NO-MORE-GRIME is able to repel stains, graffiti and food products; is non film-forming; makes cleaning easier - can use common cleaners; is able to work without changing the appearance of the surface - keeps the original look; is suitable for indoor and outdoor use; antimicrobial properties built in to protect product; is highly water vapour permeable - able to breathe and dry out; stands up to weathering and wearing; is very alkali resistant - won't breakdown in contact with cement based materials; is able to seal hairline cracks up to 0.3 mm (0.012 in.) and does not flake or peel; VOC < 10 g per litre; comes with a 20 year warranty for the treated surface.
Warranty: A 20 YEAR PERFORMANCE WARRANTY is offered for the treated surface when product is applied by an Accredited Applicator following our written instructions and surface is maintained regularly using our written recommended maintenance system. Spills should still be cleaned up immediately to minimise absorption.
Application rate: Total application rate is approximately one litre per three to 25 sq. metres (30 to 250 sq. feet per quart) depending on absorption.
How to use:
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
2. Ensure surfaces to be treated are dry, clean and free of residues.
3. Product is to be applied without thinning.
4. Generously saturate the surface with product using a low-pressure hand spray, lamb's wool applicator or brush. Surface should have a mirror-like "wet" look for 3-5 seconds. Avoid contact with surrounding areas.
5. Wait until touch dry or, a minimum of 20 minutes, and repeat Step 4 making sure it complelely rubs in. Total application rate is approximately one litre per three to 25 sq. metres (30 to 250 sq. feet per quart) depending on absorption.
6. Allow 10 minutes for product to penetrate surface then polish surface with a clean white dry cloth to remove excess, moistening cloth with product to ease polishing. Clean equipment with water. Note: Sealer will not prevent surface etching or wear and may lighten or darken some surfaces.
Precautions: Do not take internally. Apply when surface temperature is between 5 - 35ºC (40 - 95ºF). Avoid moisture contact with the surface for 6 hours after application. Protect surrounding areas from over spray. Keep away from drains, plants, water and soil. Wear suitable gloves, protective clothing and safety goggles during application and avoid applying in windy conditions. Wash hands thoroughly.
Active content: Mixture contains approximatly 25 per cent active ingredients in water.
Pack size: North America 1 quart and 1 gallon, Elsewhere 1 and 5 litre container.
Storage: Use product within 12 months of purchase. Keep container tightly sealed, in a cool well-ventilated place. Product is freeze-thaw stable.
